====== PSYMON 1.20B for the SST-6809 ======

The PSYMON monitor from Percom Data Systems, adapted to run on the [[https://github.com/KenWillmott/SST-6809|SST-6809]] single-board computer.

===== Manual =====
{{psymon.pdf}}

===== Assembler Source =====
{{psymon120b-sst.asm}}

===== Assembled Listing =====
{{psymon120b-sst.lst}}

===== S-Record File =====
{{psymon120b-sst-g8000.s19}}

===== Debian Quick Start =====
Connect the SST_6809 USB-C to a USB port on your Debian machine.

Verify the status LED is lit blue.

On Debian, install the minicom serial terminal program:
  $ sudo aptitude install minicom

Run minicom and specify your USB device:
  $ minicom -D /dev/ttyUSB0

Configure the minicom terminal timings:
  CTRL+A T 
  Choose D and enter 1 for 1ms newline delays
  Choose F and enter 1 for 1ms character delays
  Press ENTER to exit the terminal configuration menu

At the ASSIST09 ">" prompt, start a [L]oad:
  >L [ENTER]

Paste the Psymon S-records file from minicom into the SST-6809:
  CTRL+A Y
  [Go To] the folder you saved the S19 file to.
  [SPACE] to select the S19 file itself
  [ENTER]  

Now wait until you see ">00" for successful load or "?" for a failed load.

At the ASSIST09 ">" prompt, start Psymon:
  G 8000
  CMD?
 
Return to [[:SST-6809:]]