The PSYMON monitor from Percom Data Systems, adapted to run on the SST-6809 single-board computer.
Connect the SST_6809 USB-C to a USB port on your Debian machine.
Verify the status LED is lit blue.
On Debian, install the minicom serial terminal program:
$ sudo aptitude install minicom
Run minicom and specify your USB device:
$ minicom -D /dev/ttyUSB0
Configure the minicom terminal timings:
CTRL+A T Choose D and enter 1 for 1ms newline delays Choose F and enter 1 for 1ms character delays Press ENTER to exit the terminal configuration menu
At the ASSIST09 “>” prompt, start a [L]oad:
>L [ENTER]
Paste the Psymon S-records file from minicom into the SST-6809:
CTRL+A Y [Go To] the folder you saved the S19 file to. [SPACE] to select the S19 file itself [ENTER]
Now wait until you see “>00” for successful load or “?” for a failed load.
At the ASSIST09 “>” prompt, start Psymon:
G 8000 CMD?
Return to SST-6809